6

Feb

2023

Radicon partners with Artec Machine Systems

Elgin, February 6 – Radicon Drive Systems and Artec Machine Systems have entered into a definitive agreement to serve customers seeking high-speed power transmission solutions in the United States, Canada, and Mexico. 




17

Dec

2021

Artec announces new AEX Extruder Gearbox for the food processing industry

ARTEC’s robust line of twin-shaft extruder drives has been built for Super High Density/Torque applications for food processing industries. These NEW transmission drives are available to produce the highest working reliability for a given application.  Special twin-screw extruders (synchronous) must be able to absorb the very high torques and axial forces set up by the extrusion process, Artec has developed an extruder gear unit with a double power-splitting system and special high axial load thrust bearings.




26

May

2020

HOSBURGH & SCOTT CO names ARTEC sales representative for MEXICO.

ARTEC will act as sales representative for HORSBURGH & SCOTT at specific accounts, mainly in the sugar and steel industries in Mexico. We are very pleased by the confidence H&S has placed on us and we look forward to this collaborative effort that will generate synergies and will give us competitive advantages in this market.


23

Apr

2020

Calculated Scuffing Risk: Correlating AGMA 925-A03, AGMA 6011-J14 and Original MAAG Gear Predictions

This paper relates specifically to gears that are finish ground and considered high speed per ANSI/AGMA 6011; meshing elements with PLVs (pitch line velocities) in excess of 35 m/s or rotational speeds greater than 4,500 rpm (Ref. 1). Current application standards by AGMA & ISO both provide methods for rating gears for macropitting and bending fatigue. However, neither have a standard to calculate scuffing risk. Both have provided documents; AGMA 925-A03 and ISO/TS 6336-20 (formally ISO/TR 13989-1) as informative suggestions to consider scuffing risk in gear design. Nevertheless, scuffing requires the same consideration as macropitting and bending in rating gears — especially in high-speed applications with high sliding velocities. Scuffing is not a fatigue phenomenon and may occur instantly, often during early stages of operation. This failure is directly related to the lubricant oil film, which does not adequately separate the surfaces. Figure 1 is a classic example of gear tooth scuffing.



16

Jul

2019

Artec Machine Systems featured in GEAR Solutions Magazine

Gears are essential parts to the workings of countless machines, but when those machines are dependent on specifically designed gears, then service and repair can become a special niche.

For Artec Machine, servicing equipment furnished with specially engineered gearing is at the very heart of what the company does.

“We consider ourselves a leader on high-quality installations,” said John Amendola, CEO of Artec Machine. “We only work on engineered products. We don’t get involved much with commodity type gears. Gears that you can select out of a catalog, that’s not our business.”

Read the full Article at GearSolutions.com





2

Feb

2016

Artec Machine Systems Meets with new Partners

North Branford, Connecticut January 20, 2016: Artec Machine Systems kicked off the 2016 year with a training seminar focused on our recently established partnerships with Kaman Industrial Technologies and Rexnord (Falk). This seminar is focused on developing our customer base even deeper into the New England and Tri-State area. Training seminars were provided to over twenty Artec partners free of charge, in order to educate our new colleagues on the importance of maintenance, planned inspections and proper overhaul techniques as to avoid unexpected failures. 


23

Dec

2015

Artec Machine Systems Expanding with New Shop Bay and Partnerships

Artec Machine Systems is pleased to announce they are expanding their business in a few ways. The expanded shop space has been added to better accommodate new customers and our recently established partnerships with Kaman Industrial Technologies, Rexnord (Falk), and Nord Drive Systems Artec has seen an increased demand for in-house shop services, requiring a larger capacity in which to perform the repairs, rebuilds, no-load testing and other work services.


21

Oct

2015

Artec expands to become a REXNORD "Falk" Select Partner

This year has resulted in outstanding growth for Artec. Running near full capacity, Artec has made some key decisions to expand and overcome this challenge. Artec is honored to announce that during this time of growth, Artec has become one of the Select Partners in North America by Falk Authentic Gear Parts by Rexnord. We continue to meet the needs of our customers by expanding, innovating and partnering with great partners like Rexnord "Falk". Our new relationship ...


31

Aug

2015

New Artec Service Partnership with Kaman Industrial Technologies

Artec Machine Systems is pleased to announce it has expanded its strong partner relationships by adding Kaman Industrial Corporation to the family. In August 2015, the two parties came together on an agreed business relationship that benefits both sides. This relationship entails Artec being a North American authorized service center for Kaman. When handling Kaman, Artec has the shop capabilities to disassemble and reassemble the gearboxes, technical opinions, and repair ...


3

Jun

2015

New Artec Service Partnership with Nord DriveSystem

Artec Machine Systems is pleased to announce it has expanded its strong partner relationships by adding Nord DriveSystems to the family. In late May 2015, the two parties came together on an agreed business relationship that benefits both sides. This relationship entails Artec being an authorized repair center for Nord DriveSystems. It is the only northeast authorized repair center in the United States. When handling Nord’s drive systems, Artec has the shop capabilities to ...

 


1

Apr

2015

Artec presents Perpetual Regimental Alumni Development Award

Artec Machine Systems presents the Perpetual Regimental Alumni Development Award to Maine Maritime Academy[/caption]   March 25, 2015 - Artec Machine Systems presents the Perpetual Regimental Alumni Development Award to Maine Maritime Academy. This award is presented on an annual basis. Hello Students, professors, administrators, and staff, my name is Nicholas Chieppo I am a Senior Field Service Technician here..


15

Nov

2013

Artec Gains Dynamic Balancing Capability

With the commissioning of Artec’s new dynamic balancing machine, Artec has expanded its capability to provide dynamic balancing to customers. With a shortage of industrial dynamic balancing providers in CT and the North East, Artec plans to quickly achieve its goal of becoming the premier balancing provider for rotating machinery in New England.

 


12

Apr

2013

Artec expands its shop and on-site support capabilities to include Magnetic Particle Inspection Certification

12 April 2013 ‐ Artec Machine Systems is pleased to announce efforts are being made to increase our capacity and to give our customers increased confidence in our state-of-the-art gearbox repair facility. One of the steps we have recently completed is that 2 of our dedicated employees have successfully completed the course in Magnetic Particle Inspection Level II conducted by Atlantic NDT Training of Branford, CT. The course and examinations administered follow the guidelines of the ...




1

Apr

2011

Artec is awarded order for advanced gear system for US Department of Energy's Hydrogen Delivery System

United States-based company has placed an order with Artec Machine Systems for the engineering of an integral compressor gearbox for a high-performance hydrogen compressor to be utilized for pipeline transmission. This new program seeks to promote hydrogen as a fuel source to provide the United States with diverse, secure, and emissions-free energy for the future. The pinions of this prototype gearbox will run with a nominal speed of 60,055 rpm, and transmit power of 1,000 kW each. ...


1

Jun

2010

Artec Installs New Drive-In Paint and Bead Blasting Booth

Our new 10'W x 12'L x 12'H CrossFlow Booth draws fresh air through filters installed in the drive-in doors. This clean filtered air is pulled through the booth and then exhausted through an environmentally friendly filter system. For all gearbox and component rebuilds; ARTEC first bead blasts clean all external casings and covers. Our final finish includes a corrosion-resistant sprayed undercoat followed by an oil-resistant attractive top coat.



1

Oct

2009

Artec completes its 1st API-613 high speed 4 hr no-load test @ 53,141 RPM!

Artec successfully completes its 1st API-613 no-load gear test. Artec's high-speed dual pinion gear tested at 48,310 rpm & over sped to 53,141 rpm! Real-time monitoring and recording of: speed, torque, noise, power losses, oil flows, 8 point radial shaft vibrations, 2 point axial vibration, 2 point casing acceleration, all bearing temperatures (up to 10 points), oil supply and return temperatures Artec's high-speed prototype dual pinion gear shall be utilized for a CryoEnergy Storage ...


1

Aug

2009

Artec awarded contract to design Gearbox Drive System for Environmental Tectonics Corporation

The GYROLAB GL-6000 offers advanced capabilities in motion technology for STOVL and VTOL dynamic flight simulation, flight phase transition training, dynamic G tolerance and spatial orientation. the GL- 6000 also offers capabilities in situational awareness, fatigue countermeasures and adaption to unusual acceleration environments. This advanced training and research device is compatible with interchangeable cockpits with widefield-of-view visual displays and medical monitoring.


1

Dec

2008

Artec Machines Systems Expands Capability as Gear Specialists

Artec Machine Systems has expanded its capability to provide field services for turbo power and marine gears regardless of manufacture. This includes field inspections, applied diagnostic full-spectrum vibration analysis, repair of existing gear units of all manufacturers, and reverse engineering replacement units for revamps and unit upgrades as well. Artec will focus on gear technology as a specific discipline for all facets of gear unit design in any installation throughout North and ...


1

Dec

2008

Artec Machine Systems expands capability for Cement Industry Mill Gears

Artec Machine Systems has expanded its capability to provide field services for heavy-duty cement gears regardless of manufacture. This includes field inspections, applied diagnostic full-spectrum vibration analysis, repair of existing gear units of all manufacturers, and reverse engineering replacement units as well. Artec will focus on gear technology as a specific discipline for all facets of gear unit design in any installation throughout North and South America. This increased ...


1

Jun

2008

Artec supports local North Branford, CT Little League Team: ARTEC MACHINE

We want to thank Artec Machine for supporting the NBLL this year. Our Tee Ball league was made up of 7 teams which included: Baron's Braces, Artec Machine, AFA Karate, Giovanni's Pizza, Pasquariello Mechanical Corp & the New Britain Rock Cats. Artec competed in over 15 games this year starting on April 26 which was opening day and continued through the end of June. The Tee Ball teams play at either Wall Field or Stanley Field but most kids would agree that Wall field is a lot more fun. Next ...


1

May

2008

Artec participates in the sustainment of the Main Propulsion Gear System for the Littoral Combat Ship

Artec has participated in the sustainment of the Main Propulsion Gear System for the Littoral Combat Ship (LCS) developed by Lockheed Martin for the U. S. Navy. In May 2004 the U. S. Navy awarded Lockheed Martin a contract to complete the final design for this new type of vessel (LCS-1). Marinette Marine commenced the construction of the first vessel in January 2005. Lockheed Martin’s LCS was designed by Gibbs & Cox as a high-speed naval combatant vessel. The ship is powered by two ...



1

Jul

2007

Artec expands field service & in house repair capability

Artec is pleased to announce the addition of two service technicians to its staff. 15 July, 07 Brian Heath will join Artec as an in-house and field service technician. Brian will undergo a training program that will include time in residence overseas and working in the assembly and testing area of various gear manufacturing facilities. Brian will also attend an American Gear Manufacturers Association AGMA training school program. Brian comes with 6 years mechanic technician ...


1

Jun

2007

Artec commissions new in-house test bed

Artec expands its in-house aftermarket support capabilities with the installation of a new no-load variable speed test cell. All gearboxes which are overhauled and rebuilt by Artec shall undergo a 2 hour (or 4 hours) no-load diagnostic test. This shall include a full spectrum vibration analysis, noise measurements, temperature monitoring, and well has no-load gearbox efficiency measurements. Future expansion plans include high-speed testing according to API-613/5 requirements. Current ...


1

Jan

2007

MAAG Gear AG (Turbo and Marine Gear divisions) Shall Be Sold To RENK AG

Under this newly-formed subsidiary, the existing Maag Gear Winterthur group shall be renamed Renk-Maag GmbH. New and spare products (i.e. Turbogears) sold under the Renk-Maag GmbH name shall be based on original Maag technology and manufacturing techniques. Engineering, design, assembling, and testing operations for these products shall remain in Winterthur Switzerland. Maag Gear AG continues to focus and expand under Copenhagen-based FLSmidth in the cement and minerals industry. Artec ...




elecon industrial gearbox repair service
radicon industrial gearbox repair service
maag industrial gearbox repair service
custom high-speed gearbox design
kissling industrial gearbox repair service
zf lohmann industrial gearbox repair service
custom high-speed gearbox design

Artec News

Intertek ISO 9001:2008
AGMA gear box repairs and gearbox refurbishment